Fixed Motion to update frequently

mqtt/motionSensor.py

@@ -0,0 +1,90 @@
+import time
+import board
+import adafruit_dht
+import psutil
+import random
+import RPi.GPIO as GPIO
+import time
+
+from paho.mqtt import client as mqtt_client
+
+name = 'test'
+broker = '192.168.0.196'
+port = 1883
+motionTopic = "home/office/motion/status"
+username = 'mqtt'
+password = 'falrenforbreakfast'
+
+
+client_id = f'python-mqtt-office-{random.randint(0, 1000)}'
+
+#We first check if a libgpiod process is running. If yes, we kill it!
+for proc in psutil.process_iter():
+    if proc.name() == 'libgpiod_pulsein' or proc.name() == 'libgpiod_pulsei':
+        proc.kill()
+
+#12 is the pin number
+pir_sensor = 12
+
+GPIO.setmode(GPIO.BCM)
+
+GPIO.setup(pir_sensor, GPIO.IN)
+
+#Function Definitions
+def connect_mqtt():
+    def on_connect(client, userdata, flags, rc):
+        if rc == 0:
+            print("Connected to MQTT Broker!")
+        else:
+            print("Failed to connect, return code %d\n", rc)
+
+    client = mqtt_client.Client(client_id)
+    client.username_pw_set(username, password)
+    client.on_connect = on_connect
+    client.connect(broker, port)
+    return client
+
+
+def getValues(pir_sensor):
+    current_state = 0
+    try:
+        while True:
+            time.sleep(1)
+            current_state = GPIO.input(pir_sensor)
+            #Condition if motion is detected
+            if current_state == 1:
+                print("GPIO pin %s is %s" % (pir_sensor, current_state))
+                return current_state
+            else:
+                return current_state
+    except KeyboardInterrupt:
+        pass
+    finally:
+        return current_state
+    
+        
+
+
+def publish(client, current_state):      
+        #Publish Temp Results
+        motionMsg = '{{ "state": "{}" }}'.format(current_state)
+        #tempMsg = temp
+        result = client.publish(motionTopic, motionMsg)
+        status = result[0]
+        if status == 0:
+            #print(f"Send `{tempMsg}` to topic `{tempTopic}`")
+            pass
+        else:
+            print(f"Failed to send message to topic {motionTopic}")
+
+ #Run functions
+client = connect_mqtt() # Connect to Broker
+client.loop_start() #Start loop
+while True:
+    current_state = getValues(pir_sensor)
+    publish(client, current_state)
+#    print(current_state)
+
+client.loop_stop()    #Stop loop 
+client.disconnect() # Disconnect
+#    GPIO.cleanup()

mqtt/tempHumidSensor.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=Script for the Temp & Humidity sensors through MQTT 
+After=multi-user.target
+[Service]
+ExecStart=/usr/bin/python3 /home/pi/homeassistantPi/mqtt/tempSensor.py
+User=pi
+Restart=on-failure
+RestartSec=30s
+[Install]
+WantedBy=multi-user.target

mqtt/tempSensor.py

@@ -46,7 +46,8 @@ def getValues(sensor):
         try:
             temp = sensor.temperature
             humidity = sensor.humidity
-            
+            print("Temp:", temp)
+            print("Humidity:", humidity)            
             #convert to Farenheit
             temp = (temp * 1.8) + 32
             #Round the decimals